Features

True Integrated Development Environment

Created to give machine developers complete control from a single environment, Sysmac Studio integrates configuration, programming, simulation, and monitoring in a simple interface. This advanced software tool is the sole software required for the NJ-Series machine automation controller, which brings together logic, motion, and vision onto a single platform. The main hardware product series inside the IDE are...

  • NJ/NX Series controllers
  • NA Series HMI
  • NX Series I/O and safety
  • G5 Series servo
  • MX2 Series and RX-series frequency inverter
  • FH and FQM vision system and sensor
  • GX network components
  • E3 N-Smart sensors
  • ZW-series measurement sensors

Other utilities for HMI design, and expanded information network configuration are also included in the software suite. One software to control and configure the entire machine with a single connection gives you the power and efficiency to develop and create like never before.

Latest Version: Sysmac Studio V1.14

Standards

inlineST.jpg

Compliance With Familiar Standards

Fully compliant with the open standard IEC 61131-3, Sysmac Studio provides a state-of-the-art programming environment based on the ladder diagram, structured text programming languages and on program organization units which include programs, functions, and function blocks. Additionally, motion control instructions that are based on PLCopen standards and an instruction set that follows IEC rules are included. Providing a familiar programming environment virtually eliminates the learning curve for a new software allowing for quick adoption.

Variables

iorack.jpg

Programming with Variables

There is no need to learn the internal memory map of the NJ-series controller. Sysmac Studio automatically assigns memory in the CPU Unit to variables that you create promoting faster development and reducing errors. This also eliminates the need to wait for memory address definitions for hardware before the start of software development. Hardware and software can be designed independently and developed in parallel.

Easy

overview.jpg

Easy Operation

Sysmac Studio places as few restrictions as possible on the design procedures to allow you to start design work from any part of the system. The design concept features easy-to-understand operating procedures with suitable guides that do not interfere with the workflow. This provides user-friendly operation for flexible design work in which even mistakes in settings and procedures can be corrected immediately or left until the project is finalized as long as they will not lead to serious accidents.

Debugging

simulation.jpg

Complete Debugging

Sysmac Studio provides complete functions for debugging sequence control, such as changing present values and changing programming online. It also provides debugging functions with simulations of motion control, such as displaying results in 2D or 3D and displaying traces on virtual devices. The new 3D Simulation tool offers a programmer the opportunity to see the physical movement and machine sequence that is a direct result of the code and configuration they choose to implement.
trace.jpg
To accurately simulate motion control, Sysmac Studio provides instructions to create virtual external signals such as positive/negative limit switch, home proximity signal, external latch and intermediate stop input signals. Motion alarm and warning instructions can be implemented as well to provide the programmer with additional fault recovery testing measures. The included data trace feature also gives a high level of detail and displays a time chart graph in parallel with 2D or 3D path markers. The simulation results are recorded in a data trace file, allowing closer examination of the performance to guarantee proper operation. Combining 3D motion simulation with the CPU emulator gives the programmer utilities to assess the correct sequencing, optimum path control, minimum execution time and other critical operations. As a result, the gap between machine concept and operation is dramatically reduced.

Security

Maximum Security

Advanced functions to protect your investment and secure the machine are standard in Sysmac Studio. Preventing incorrect connections, operation or theft of assets are paramount for both large and small projects. Features such as confirmation of Controller names and serial ID's, administrator access rights and controller write protections protect your machine while authentication of user program execution and password protection for project files protect your intellectual development property. With 32 digit security passwords, your system is always safe.

Tasks

Task Control

A function of both the NJ-series controller and Sysmac Studio, task management ensures your control system operates exactly as planned. The Task System used by NJ-series controllers is used to assign an execution condition and execution order to a series of processes, such as I/O refreshing and user program execution. This new level of control allows a programmer to select how the CPU operates during run-time to guarantee consistently fast operation for the life of the machine. Sysmac Studio provides simple and clear adjustments for your task settings as well as powerful performance evaluation tools. Only valid options are shown for task selection, guiding the user to an appropriate configuration. Once a configuration is chosen, program timing can be monitored to ensure optimal operation. The Task Execution Time Monitor can be used with the Simulator to display execution times before downloading to the physical controller. These new software tools allow the user to predict the operation of the machine before implementation rather than responding to unexpected behavior during commissioning.
Specifications & ordering info

Ordering information

Automation software

Please purchase a DVD and licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. The license does not include the DVD.

Product

Specifications

Order code

Description

Number of licenses

Media

Sysmac Studio Standard Edition Ver. 1.☐☐

The Sysmac Studio provides an integrated development environment to set up, program, debug and maintain NX7/NJ series controllers, other machine automation controllers, EtherCAT slaves and HMI.

 

Sysmac Studio runs on the following OS:

Windows XP (Service Pack 3 or higher, 32-bit version)/
Windows Vista (32-bit version)
Windows 7 (32-bit/64-bit version)
Windows 8 (32-bit/64-bit version)
Windows 8.1 (32-bit/64-bit version)

- (Media only)

DVD1

SYSMAC-SE200D

1 license

-

SYSMAC-SE201L

3 licenses

-

SYSMAC-SE203L

10 licenses

-

SYSMAC-SE210L

30 licenses

-

SYSMAC-SE230L

50 licenses

-

SYSMAC-SE250L

Sysmac Studio Vision Edition Ver. 1.☐☐2,3

Sysmac Studio Vision Edition is a limited license that provides selected functions required for FQ-M and FH series vision sensor settings.

1 license

-

SYSMAC-VE001L

Sysmac Studio

Measurement Sensor

Edition Ver. 1.☐☐3 , 4

Sysmac Studio Measurement Sensor Edition is a limited license that provides selected functions required for ZW-series displacement sensor settings

1 license

-

SYSMAC-ME001L

3 licenses

-

SYSMAC-ME003L

Sysmac Studio NX I/O Edition Ver. 1.☐☐3 , 5

Sysmac Studio NX I/O Edition is a limited license that provides selected functions required for EtherNet/IP coupler settings.

1 license

-

SYSMAC-NE001L

Sysmac Studio HMI Edition3 ,6

Sysmac Studio HMI Edition is a limited license that provides selected functions required for NA-series PTs settings.

1 license

-

SYSMAC-HE001L

Sysmac Studio Robot Additional Option3

Sysmac Studio Robot Additional Option is a limited license to enable the Vision & Robot integrated simulation.

1 license

-

SYSMAC-RA401L

Note: Site licenses are available for users who will run Sysmac Studio on multiple computers. Ask your OMRON sales representative for details.

Components

DVD (SYSMAC-SE200D)

Components

Details

Introduction

An introduction about components, installation/uninstallation, user registration and auto update of the Sysmac Studio is provided

Setup disk (DVD-ROM)

1

 

 

 

License (SYSMAC-SE2 ☐☐ L/VE0 ☐☐ L/ME0 ☐☐ L/NE0 ☐☐ L/HE0 ☐☐ L/RA4 ☐☐ L)

Components

Details

License agreement

The license agreement gives the usage conditions and warranty for the Sysmac Studio

License card

A model number, version, license number and number of licenses are described

User registration card

Two cards are contained. One is for users in Japan and the other is for users in other countries

Included support software

DVD media of Sysmac Studio includes the following support software:

Included support software

Outline

CX-Designer

Ver. 3.☐☐

The CX-Designer is used to create screens for NS-series PTs

CX-Integrator

Ver. 2.☐☐

The CX-Integrator is used to set up FA networks

CX-Protocol

Ver. 1.☐☐

The CX-Protocol is used for protocol macros for serial communications units

Network Configurator

Ver. 3.☐☐

The Network Configurator is used for tag data links on the built-in EtherNet/IP port

SECS/GEM Configurator7

Ver. 1.☐☐

The SECS/GEM Configurator is used for SECS/GEM settings.


1. The same media is used for both the Standard Edition and the Vision Edition.

2. With the Vision Edition, you can use only the setup functions for FQ-M and FH series vision sensors.

3. This product is a license only. You need the Sysmac Studio Standard Edition DVD media to install it.

4. With the Measurement Sensor Edition, you can use only the setup functions for ZW-series displacement sensors.

5. With the NX I/O Edition, you can use only the setup functions for EtherNet/IP coupler.

6. With the HMI Edition, you can use only the setup functions for NA-series PTs.

7. Please, purchase the required number of SECS/GEM Configurator licenses.

1. The same media is used for both the Standard Edition and the Vision Edition.

2. With the Vision Edition, you can use only the setup functions for FQ-M and FH series vision sensors.

3. This product is a license only. You need the Sysmac Studio Standard Edition DVD media to install it.

4. With the Measurement Sensor Edition, you can use only the setup functions for ZW-series displacement sensors.

5. With the NX I/O Edition, you can use only the setup functions for EtherNet/IP coupler.

6. With the HMI Edition, you can use only the setup functions for NA-series PTs.

7. Please, purchase the required number of SECS/GEM Configurator licenses.

Registration & downloads

Software Registration & Downloads

software engineer_2
In the Software Registration & Downloads Area of Omron Europe B.V. you will be able to register your Omron software products. After registration you will have access to your personalized software download area from where you can download libraries and updates for our software products.
Sysmac Library

Applications

Sysmac Library is a new addition to Sysmac Studio’s already integrated development environment. This free online software library lets licensed Sysmac Studio users download rigorously tested Function/Function Blocks for multiple applications in different industries. The libraries are intended to be used with both the NX701 and NJ501/301/101 series machine automation controllers. This free resource will help reduce programming time and focus on increasing the efficiency of your overall system. Make sure to check the Sysmac Library download link at regular intervals for new modules. 

Click Here .

Downloads

Brochures

Show all brochures

Catalogues

Show all catalogues

Datasheets

Show all datasheets

Manuals

Show all manuals

Software tools

download

Sysmac Studio TRIAL Software

en ZIP 1.99 GB
o

Please or get direct access to download this document

Show all software tools

Have a question?

We are ready to help.

Contact us

Download catalogue

Browse our products offline (PDF).

Get your copy

Product documentation

Download datasheets, manuals and brochures.

Browse download center

Events and fairs

See our systems in use and consult our experts.

View upcoming events